Fluke 115 vs 117 Multimeter Reviews

When it comes to Multimeters , FLUKE is one brand you just cannot ignore. They are one of the most reliable Multimeter manufacturers on the market and this is because their products are known to be very accurate.

A good example of what they offer can be found in the Fluke 115 , which is one of the hot selling digital multimeters on the market. Another good product is the Fluke 117 which bears resemblance with almost no noticeable difference.

In this article , we will examine Fluke 115 vs 117 , highlighting the similarities and differences of each product , thereby helping you make a decision on which is best for you. Read along.

 

 

Fluke 115 vs 117 – How Do They Compare?

Here’s a table comparing the specifications of fluke 115 vs 117 :

Technical SpecsFLUKE 115FLUKE 117
Max voltage between terminal and earth ground600V600V
DisplayDigital: 6,000 counts, updates 4 per secondDigital: 6,000 counts, updates 4 per second
Surge Protection6 kV peak per IEC 61010–1 600 VCAT III, Pollution Degree 26 kV peak per IEC 61010–1 600 VCAT III, Pollution Degree 2
Battery Type9 volt Alkaline, NEDA 1604A/ IEC 6LR619 volt Alkaline, NEDA 1604A / IEC 6LR61
Battery life400 hours typical, without backlight400 hours typical, without backlight
DC Millivolts (range)600.0 mV / 0.1 mV600.0 mV / 0.1 mV
Dc Volts (range)6.000 V / 0.001 V
60.00 V / 0.01 V
600.00 V / 0.1 V
6.000 V / 0.001 V
60.00 V / 0.01 V
600.00 V / 0.1 V
Ac Millivolts (range)600.0 mV / 0.1 mV600.0 mV / 0.1 mV
Ac Volts (range)6.000 V / 0.001 V
60.00 V / 0.01 V
600.0 V / 0.1 V
6.000 V / 0.001 V
60.00 V / 0.01 V
600.0 V / 0.1 V
Ohms (range)600.0 Ω / 0.1 Ω
6.000 kΩ / 0.001 kΩ
60.00 kΩ / 0.01 kΩ
600.0 kΩ / 0.1 kΩ
6.000 MΩ / 0.001 MΩ
600.0 Ω / 0.1 Ω
6.000 kΩ / 0.001 kΩ
60.00 kΩ / 0.01 kΩ
600.0 kΩ / 0.1 kΩ
6.000 MΩ / 0.001 MΩ
Capacitance (range)1000 nF / 1 nF
10.00 μF / 0.01 μF
100.0 μF / 0.1 μF
9999 μF / 1 μF
100 μF to 1000 μF
1000 nF / 1 nF
10.00 μF / 0.01 μF
100.0 μF / 0.1 μF
9999 μF / 1 μF
100 μF to 1000 μF
Diode test (range)2.00 V / 0.001 V2.00 V / 0.001 V

So , what then is the difference?

The answer :

ghost voltage detector and non-contact voltage detector

Looking at the table above it is hard to tell any difference between the fluke 115 and 117 multimeter. Infact , they are the same thing except that Fluke 117 comes with ghost voltage detector and non-contact voltage detector which is not available on Fluke 115.

This added feature prevents the Fluke 117 from giving false readings and this is why it is the most preferred multimeter by electricians. Also , Fluke 117 is best for commercial applications (e.g  in schools , buildings and hospitals)  while Fluke 115 is best used for electronics and electrical testing.

What are their similarities? :

There are so many similarities between them but we would highlight the most important ones in this section. You can refer to our table above for more details.

  • They are often called “twins” because they have identical design and look the same.
  • They have digital display with 6000 counts and 4 updates per second.
  • They have battery life of 400 hours (without backlight)
  • Both units (Fluke 115 and 117) are tested safe for CAT III 600V environments and boasts a DC accuracy of +/- .5% +2
  • The Voltage, Current, Resistance, Frequency, and Capacitance measurement of both units are the same
  • Neither the 115 nor 117 offer Temperature Measurement, Data Logging,
  • They come with 3-years warranty

Where can you buy them ? :

Both Multimeters can be purchased from any standard electrical store around you but if you’re all about online shopping , you can get them on Amazon and have it delivered to your doorstep. Use the links below to purchase :

Conclusion :

Both multimeters are great products and would work well for their intended use. If you’re a professional electrician , the Fluke 117 will serve you well and if you’re an hobbyist who just wants to run a few tests , the Fluke 115 is the best choice for you.

Hey Guys! , I am Daniel Coleman and I LOVE CARS. I’m a computer programmer by profession but when not writing code , you’d find me researching on new cars and keeping up with the latest automotive trends.
Say hello ! , message me on  daniel.coleman250@gmail.com

Related Posts

Leave a Comment